跟著工業高速開展，工業排放的廢氣所造成的大氣污染越來越嚴峻。工業廢氣主要有二氧化碳、二硫化碳、硫化氫、氟化物、氮氧化物、氯、氯化氫、一氧化碳、硫酸（霧）、煙氣、粉塵、丙酮、丁酮、苯、甲苯、二甲苯等苯系物有機廢氣。
With the rapid development of industry, the air pollution caused by industrial waste gas is becoming more and more serious. Industrial waste gas mainly includes carbon dioxide, carbon disulfide, hydrogen sulfide, fluoride, nitrogen oxide, chlorine, hydrogen chloride, carbon monoxide, sulfuric acid (FOG), flue gas, dust, acetone, butanone, benzene, toluene, xylene and other benzene series organic waste gas.
工業廢氣作為大氣污染的重要來歷，工業廢氣治理尤為重要，由于工廠出產的工藝不同，工業廢氣發生的廢氣污染物品種也不同，針對不同類型廢氣污染物應選用不同的廢氣處理工藝，今天小編給大家介紹工業廢氣處理需要留意哪些問題。
Industrial waste gas as an important source of air pollution, industrial waste gas treatment is particularly important. Due to the different processes produced by factories, the types of waste gas pollutants produced by industrial waste gas are also different. Different waste gas treatment processes should be selected for different types of waste gas pollutants. Today's small edition introduces what problems should be paid attention to in industrial waste gas treatment.
工業廢氣處理需要留意問題工業廢氣處理類型大致可分為可燃氣體的處理、助燃氣體的處理、毒性氣體的處理、惰性氣體的處理?？扇細怏w的處理，可燃氣體的排放，假如排放量較大，應盡或許挑選人少的當?shù)?，留意周圍制止火，并備有相應的滅火器、砂子和水?/div>
Industrial waste gas treatment needs attention. The types of industrial waste gas treatment can be roughly divided into combustible gas treatment, combustion supporting gas treatment, toxic gas treatment and inert gas treatment. For the treatment of combustible gas and the discharge of combustible gas, if the discharge is large, select the place with few people as far as possible, pay attention to the surrounding area to stop the fire, and provide corresponding fire extinguisher, sand and water.
排放鋼瓶中的可燃氣體，工作人員應站在出氣口的旁邊面進行操作，以防氣體噴出傷人。選用焚燒法處理時，應裝置減壓閥，控制可燃氣的速度，盡量使氣體漸漸放出，使之在焚燒裝置內充沛焚燒掉。助燃氣體的處理將黏著在容器閥門上或運用器具上的粉末、石油類、油脂類及可燃性物質，底清除干凈后，方可進行助燃氣的處理。
When discharging the combustible gas in the cylinder, the staff should stand at the side of the gas outlet to prevent the gas from ejecting and injuring people. When the incineration method is adopted, the pressure reducing valve should be installed to control the speed of combustible gas, so as to make the gas release gradually, so that it can be fully incinerated in the incineration device. For the treatment of combustion supporting gas, the powder, petroleum, grease and combustible substances adhered to the container valve or appliance can be treated only after the bottom is cleaned.
以上就是處理工業廢氣需要注意的問題，希望上述內容對大家有所幫助。
The above is the treatment of industrial waste gas need to pay attention to the problem, I hope the above content to help you.
魯公網安備37011202000764號號 網站地圖XMLTXT
企業二維碼
2020-10-09
